Cement slurries are designed to achieve zonal isolation; improve rheological properties and displacement efficiency of cementing system. Oil well cement slurries depend on temperature, additive concentrations; quality and quantity, to contribute to the placement and success of cementing operation. This study aims at analysing the effects of cement slurry additive concentration on rheology at different temperature conditions. Three additive concentrations were varied; Retarder, Fluid Loss Additive and Dispersant. Using full factorial design, 27 experiments were carried out to analyse the effect of these additives at different temperatures. Rheological properties like plastic viscosity, yield stress, shear rate and shear stress were experimentally determined at different temperatures and concentrations of additives. A simple cement slurry design which consists of: Dyckerhoff Class G, Fluid Loss Additive, Retarder, Dispersant, Defoamer and Drill Water, was used for the laboratory experiments. The slurry was conditioned in accordance with the procedure set out in API RP 10B-2. Linear regression was then used to build models describing the effect of temperature and additive concentration on plastic viscosity and yield point of the cement slurry. Ms-Excel plots were used as a tool in presenting the relationships between Shear Stress and shear rates at varying temperature conditions. Results from the analysis reveal that for a Temperature increase of 125% and Retarder concentration increase of 200%, there were significant decline in Plastic viscosity (-41%) and Yield point (-44%). Whereas increasing the Fluid loss additive by 100% caused a significant increase in Yield point (+51%) and relatively insignificant increase in Plastic Viscosity (+4.4%).
- Ikpeka Princewill Maduabuchi, Odo Jude Emeka, Benedict Ugochukwu Wisdom, Utojiuba Ifeanyi Davida1: Department of Petroleum Engineering, Federal University of Technology, Owerri
- Uzuegbu Godson Chizirim: Haliburton Oil Services
Princewill Maduabuchi Odo Jude Emeka Benedict Ugochukwu Wisdom and Utojiuba Ifeanyi Davida Effects of Additive Concentrations on Cement Rheology at Different Temperature Conditions International Journal of Engineering Works Vol. 6 Issue 03 PP. 50-70 March 2019
-  Michaux M. Nelson EB, Vidik B (1990). Chemistry and Characterization of Portland Cement In Well Cementing. Elsevier Science Publishers Amsterdam 8-25.
-  Nelson, E. B., and Guillot, D. 2006. Well Cementing, second edition. Schlumberger.
-  Arnoldus M.A and Ade L. (2016). Compressive and Shear Bond Strength of Oil Well Cement with Calcium Carbonate and Silica Fume. Department of Civil Engineering, Faculty of Engineering.
-  Shuker MT, Memon KR, Tunio SQ, Memon MK (2014) Laboratory Investigation on Performance of Cement Using Different Additives Schemes to Improve Early Age Compressive Strength Research. Journal of Applied Sciences Engineering and Technology 7: 2298-2305.
-  API RP 10B-2, Recommended Practice for Testing Well Cements. 2013. Washington, DC: API
-  Doherty D.R. et al., (2010). Pushing Cement beyond the Norm of Extreme High Temperature. Paper IADC/SPE 134422 Presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition held in Hochi Minh City, Vietnam, 1-3 November 2010. https://doi.org/10.2118/134422-MS
-  Olowolagba K. and Brenneis C. (2010). Techniques for the Study of Foamed Cement Technology. Paper SPE 133050 presented at the SPE production and Operations Conference and Exhibition Held in Tunis, Tunisia, 8-10 June 2010. https://doi.org/10.2118/133050-MS
-  Kelessidis V.C, Fraim M., Fardis M., Karakosta E., Diamantopoulos G., P. Arkoudeas, S. ElHardalo , L. Lagkaditi, G. Papavassiliou, 2014. Comprehensive Assessment of Additive and Class G cement Properties Affecting Rheology Fluid Loss, Setting Time and Long Term Characteristics of Elastic Cements. Paper SPE 167731 presented at the SPE European Unconventional Conference and Exhibition Held in Vienna, Austria, 25-27 February 2014. https://doi.org/10.2118/167731-MS
-  Haichuan L., Chengbin X., Yonghui G., Lirong L., Haijin Z., (2016). Cement Slurries with Rheological Properties Unaffected By Temperature. Paper SPE 178922. https://doi.org/10.2118/178922-PA
-  Bakirov D.L., Burdyga V. A., Svyatukhova S.S., Melekhov A.V., Kafarova I.V., Sledkov V.V., Shadchnev A.N., Shtyfel A.P., Yakunin S.A., Chudinov V.A., (2016). Cement fir Temperature range 160-300o C. Paper SPE -181935-MS Presented at the SPE Russian Petreoleum Technology Conference. https://doi.org/10.2118/181935-RU
-  Okoro O., Nwakpu G. (2017). Undergraduate Thesis presented to Department of Petroleum Engineering, Federal University of Technology Owerri.