The perovskite solar cell has been analyzed by through mechanism and its equivalent circuit model. The software which is used in the simulation of an IV characteristic of Perovskite solar cell was developed by the GPVDM software .The increase in Power Conversion efficiency (PCE) has been shown through numerical modelling and is caused by when we increase the thickness of the absorbing or active layer. Hence efficient charge separation occurs. Apart from that effect of the electrical parameters such as series resistance Shunt resistance, band gap etc. on its I-V characteristics, Jsc and Voc is also simulated and its effect of efficiency has been noted.
Muhammad Aitezaz Hussain: Centre for Advanced Studies in Energy (CAS-E), University of Engineering and Technology Peshawar, Pakistan
Sobab Khan: Centre for Advanced Studies in Energy (CAS-E), University of Engineering and Technology Peshawar, Pakistan
Ahtasham Rahim: Centre for Advanced Studies in Energy (CAS-E), University of Engineering and Technology Peshawar, Pakistan
Azam Jan: Department of Mechatronics Engineering, University of Engineering and Technology Peshawar, Pakistan
Mudasar Rashid: Centre for Advanced Studies in Energy (CAS-E), University of Engineering and Technology Peshawar, Pakistan
Muhammad Aitezaz Hussain Sobab Khan Ahtasham Rahim Azam Jan Mudasar Rashid "Optimization of Power Conversion Efficiency for Perovskite Solar Cell using GPVDM" Vol. 7 Issue 02 PP. 109-115 February 2020 https://doi.org/10.34259/ijew.20.702109115.
 Blaschke T, Biberacher M, Gadocha S, Schardinger I. Energy landscapes: meeting energy demands and human aspirations. Biomass- Bioenergy 2013;55:3–16.
 World Energy Outlook, International Energy Agency; 2012. 〈http://www. worldenergyoutlook.org/weo2012/〉 [Accessed March 2016].
 International Energy Agency. 2DS-hiRen Scenario, Energy Technology Perspectives; 2012
 Arif MS. Residential solar panels and their impact on the reduction of carbon emissions. reduction of carbon emissions using residential solar panels. 〈https:// www.nature.berkeley.edu/classes/es196/projects/2013final/ArifM_2013.pdf〉 [Accessed August 2016]; 2013.
 Holm-Nielsen J, Ehimen EA. Biomass supply chains for bioenergy and biorefining. Woodhead Publishing; 2016
 Al-Tameemi MA, Chukin VV. Global water cycle and solar activity variations. J Atmos Sol Terr Phys. 2016;142:55–9
 Herrando M, Markides CN. Hybrid PV and solar-thermal systems for domestic heat and power provision in the UK: techno-economic considerations. Appl Energy2016;161:512–32.
 [Mohanty P, Muneer T, Gago EJ, Yash Kotak Y. Solar radiation fundamentals and PV system components. Springe Int Publ 2015. http://dx.doi.org/10.1007/978-3-319- 14663-8_2.
 “NREL Solar Cell Efficiency Chart,” 2018. [Online]. Available:
 Ball, James M., et al. "Optical properties and limiting photocurrent of thin-film perovskite solar cells." Energy & Environmental Science 8.2 (2015): 602-609.
 bdelkader Hima, A. (2018). GPVDM simulation of layer thickness effect on power conversion efficiency of CH3NH3PbI3 based planar heterojunction solar cell. International Journal of Energetica, 3(1), 37-41.
  Duan, J., Xu, H., Sha, W. E. I., Zhao, Y., Wang, Y., Yang, X., & Tang, Q. (2019). Inorganic perovskite solar cells: an emerging member of the photovoltaic community. Journal of Materials Chemistry A, 7(37), 21036–21068. doi: 10.1039/c9ta06674h